Community Forums

RVwheels · 10-26-2009, 07:29 AM

mythplaced,
Again, thank you for your response. Sounds like we have a similar chassis arrangement. I will be looking for an ignition controlled powered source in the rear. Beginning to appear much more feasible with your described locations.

hardy1000 · 10-26-2009, 07:50 AM

I see alot of TST users and I am considering that and the Doran RV360. I like that Doran has been in business 35 years making all kinds of electronic products. I'm just trying to justify the extra cost. Does anyone have the TST hard wired?

mythplaced · 10-29-2009, 06:00 PM

Quote:

Originally Posted by hardy1000

I see alot of TST users and I am considering that and the Doran RV360. I like that Doran has been in business 35 years making all kinds of electronic products. I'm just trying to justify the extra cost. Does anyone have the TST hard wired?

Yes our monitor is hard wired to the ignition switch inside and the repeater is hardwired to the chassis batt disconnect switch.....

hardy1000 · 10-30-2009, 06:23 AM

Thanks Mythplaced,

It looks from all the respnonses that TST is the way to go. I will install a repeator in the rear.

roboniko · 11-01-2009, 05:59 AM

Quote:

Originally Posted by mythplaced

Do you have the repeater? and are you using the external antenna?

Could just be weak signal...

Sorry been out of it for a while. Although possible I do not think so as the other sensors are working fine, both front and rear. THe current problem is the right inner rear tire. Tested when installe and worked fine. First trip out, failed to work until about 1 hour into trip then worked for the rest of the way. In way home, didn't come on at all. Per TST will try and blow out with a can of air and reinstall. If that doesn't then I will call them again. No repeater installed.

walt2137 · 11-01-2009, 10:28 AM

[QUOTE=Charles D.;559218]I have an interest in moving to the TST system. Not all that satisfied with PressurePro. Can you be more specific on how you mounted your antennas

Charles I have the Pressure Pro on a 40 ft Dyn and Honda Toad with no repeater only the small antenna that came with the unit in 04, I had a problem lossing the right side of the toad until I mounted the PP on the top part of the driver window with the little suction cups mount. I do not loose any signals now and haven't for the last 3 or 4 yrs. Give it a try before you give up.