|
07-20-2018, 09:34 AM
|
#1
|
Junior Member
Join Date: Jul 2015
Posts: 4
|
"Wait to Start" light on Cummins C8.3 blinking after starting engine
In very warm weather, after waiting nearly a minute for the "Wait to Start" light to go off, I start the engine and very soon after the engine starts as it normally does; the "Wait to Start" lights starts blinking.
This is on a 1998 Monaco Windsor with a Cummins C8.3 300hp engine.
|
|
|
|
Join the #1 RV Forum Today - It's Totally Free!
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
|
07-20-2018, 09:47 AM
|
#2
|
Senior Member
Country Coach Owners Club Solo Rvers Club iRV2 No Limits Club
Join Date: May 2011
Location: Vancouver, WA
Posts: 37,725
|
Does it eventually quit blinking or continue while you drive?
__________________
2009 45' Magna 630 w/Cummins ISX 650 HP/1950 Lbs Ft, HWH Active Air
Charter Good Sam Lifetime Member, FMCA,
RV'ing since 1957, NRA Benefactor Life, towing '21 Jeep JLU Rubicon Ecodiesel
|
|
|
07-20-2018, 09:51 AM
|
#3
|
Senior Member
Join Date: Apr 2011
Location: Powell River, B.C.
Posts: 31,500
|
The " Wait to Start Light " and the intake manifold grid heater , are controlled by an intake manifold temp sensor , and if you're getting the , light on when the air, or overnight engine , temp is above 65f , I'd think that sensor is failing.
__________________
99DSDP 3884, Freightliner, XC, CAT 3126B, 300 HP /ALLISON 3060
2000 Caravan toad, Remco & Blue Ox.
|
|
|
07-20-2018, 10:47 AM
|
#4
|
Junior Member
Join Date: Jul 2015
Posts: 4
|
It has not during the 20 or 30 minutes that I've run the engine at idle.
I will run it longer.
Do you suspect something?
|
|
|
07-20-2018, 10:50 AM
|
#5
|
Junior Member
Join Date: Jul 2015
Posts: 4
|
Do you know where the intake manifold temperature sensor is located on the Cummins C8.3?
|
|
|
07-20-2018, 01:38 PM
|
#6
|
Senior Member
Join Date: Apr 2011
Location: Powell River, B.C.
Posts: 31,500
|
Not really too clear in this diagram , I'll see if I can find a better one.
EDIT: I guess before I start digging , I should confirm what fuel injection system your engine has , the "P" series inline pump ( 12 valve engine) photo one , or the CAPS system ( 24 valve) photo two . Pictures below
__________________
99DSDP 3884, Freightliner, XC, CAT 3126B, 300 HP /ALLISON 3060
2000 Caravan toad, Remco & Blue Ox.
|
|
|
07-20-2018, 03:38 PM
|
#7
|
Junior Member
Join Date: Jul 2015
Posts: 4
|
I've been pack ratted. I found the sensor and also found all the insulation leading up to the sensor has been removed by a pack rat. I should have known.
Thanks for the replies. I could not have solved this without them.
|
|
|
07-21-2018, 06:22 PM
|
#8
|
Senior Member
Join Date: Apr 2011
Location: Powell River, B.C.
Posts: 31,500
|
Glad you've found the problem , good luck with the repair , and Safe Travels.
__________________
99DSDP 3884, Freightliner, XC, CAT 3126B, 300 HP /ALLISON 3060
2000 Caravan toad, Remco & Blue Ox.
|
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|