Dan
I had the same problem on my Monaco Windsor and yes it was the check valve .
Mine was attached to the water valve in the wet bay , the one that selects tank
or house but its located behind the white plastic panel .
That panel is a bear to get out , I don't think I would try to remove it in the cold
it may crack .
You can stop the back flow for now by installing a check valve on the outside
of that valve where you screw you hose onto or an on & off valve or screw in
stopper . Those will work until you can repair properly
Mine only back flowed when I turned on the pump then it would pump the
tank dry .
I got lucky , a little piece of rubber washer was caught in my ck valve .
Ray
|