Water Temp sensor Problem
94 Monaco Executive, 300 Cummins 8.3, water temp gage reads from 0 to pegged out at any given time, sending unit is located on a block attached to front eng bulk head (seem like a direct engine mount would make more sense) sending unit has 2 output tabs, one goes to temp gage on dash,
I have no idea what other one goes to (it's not a ground for the unit) also there is a similar type unit mounted next to it. anyone out there have any idea what the 2nd tab coming off sending unit feeds to or what the single pole unit feeds to?
__________________
2003 Adventure
|