Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×
RV Trip Planning Discussions

Go Back   iRV2 Forums > THE OWNER'S CORNER FORUMS > Monaco Owner's Forum
Click Here to Login
Join iRV2 Today

Mission Statement: Supporting thoughtful exchange of knowledge, values and experience among RV enthusiasts.
Reply
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on iRV2
 
Thread Tools Search this Thread Display Modes
 
Old 09-30-2007, 09:09 AM   #1
Senior Member
 
Join Date: Jan 2003
Location: Palm Bay, FL
Posts: 706
For any of you that have been following the topic "Bear likes my bedroom slide seal" you know that it was damaged.
Do any of you know what is involved in replacing the seal itself? I've felt along the inner edges but I don't really see how you get to it unless the slide itself has to come out to access it.
Probably a trip to the Wakarusa service center for that and some other repairs is in order but if you have any idea's let me know.
Thanks,
Letsgoagain
__________________
04 HR Ambassador 38 PDQ ISC 330 Cummins,
2016 Chevy Colorado crew cab Z71
Letsgoagain is offline   Reply With Quote
Join the #1 RV Forum Today - It's Totally Free!

iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!

You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!

Old 09-30-2007, 09:09 AM   #2
Senior Member
 
Join Date: Jan 2003
Location: Palm Bay, FL
Posts: 706
For any of you that have been following the topic "Bear likes my bedroom slide seal" you know that it was damaged.
Do any of you know what is involved in replacing the seal itself? I've felt along the inner edges but I don't really see how you get to it unless the slide itself has to come out to access it.
Probably a trip to the Wakarusa service center for that and some other repairs is in order but if you have any idea's let me know.
Thanks,
Letsgoagain
__________________
04 HR Ambassador 38 PDQ ISC 330 Cummins,
2016 Chevy Colorado crew cab Z71
Letsgoagain is offline   Reply With Quote
Old 10-01-2007, 02:36 AM   #3
Senior Member
 
ronboc's Avatar
 
Monaco Owners Club
Join Date: Jul 2005
Posts: 1,253
Hey! The bear did it, let him FIX it!! (oops, that was my Dad again)


I'm not sure there is a way to do it without pulling the slide (then again, I didn't think there was a way to get the frig in/out the main door - but they did it!). I've looked at the way the seals are made and wondered the same thing too. Almost seems like the lip is going to be the tough part, since part is inside and part is outside.

Maybe give Monaco a call and ask 'em?

Keep us posted.
Ron
__________________
- - - - - - - - - - -

'06 HR Endeavor 40PAQ (Mission Hills decor). All options, but still finding more to add.
ronboc is offline   Reply With Quote
Old 10-02-2007, 09:11 PM   #4
Senior Member
 
Join Date: May 2007
Posts: 258
Ron-- sorry to be way off the subect line here...In the improvements posts, you described installing hasps on secured bay doors for some extra storage. could you please let me know what type of hasp you used and source?
Thanks,
Jim Legler
06 Dip
jdrelgel is offline   Reply With Quote
Old 10-03-2007, 02:44 AM   #5
Senior Member
 
ronboc's Avatar
 
Monaco Owners Club
Join Date: Jul 2005
Posts: 1,253
Hi Jim (relgel) -

Please check your PM's, I responded on 29 September (Let me know if you didn't receive them, and we'll figure something else out).


Thanks!
Ron
__________________
- - - - - - - - - - -

'06 HR Endeavor 40PAQ (Mission Hills decor). All options, but still finding more to add.
ronboc is offline   Reply With Quote
Reply



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Thetford Auqa Plus Blade Seal Replacement rockintom Excel Owner's Forum 16 02-14-2009 08:39 AM
slide seal wardbevj Newmar Owner's Forum 5 06-08-2008 01:43 PM
Slide seal replacement Rambler1 Fleetwood Owner's Forum 4 03-30-2008 03:48 PM

» Featured Campgrounds

Reviews provided by


All times are GMT -6. The time now is 02:12 AM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.