It was not sealed by the company PI contracted for full body paint. The units shipped from PI to Iowa for paint and then to dealership. The company that painted the Excels did not propetly seal many things after painting.
__________________ Russell
'13 Excel Winslow 34IKE
'16 GMC Sierra 3500HD
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
Yes we are finding them we have had this leak from new out at the factory 2 times and it was not found by them either.
I just got lucky and found it today because I had to clean the lint out had water in the flex for the dryer also
our 14 sdf also had water, quite a bit, coming from the pinbox area after sitting for a time and than hooking up. the first time all the trailer except the front cap was under cover(plan ahead when you build a cover). I had the dealer look at it when we took it in for black tank replacement and they sealed around the clearance lights. they said the rubber looked like it had dried and shrunk. we have had a lot of rain here in texas so I lowered the front and no water came out. will keep checking.
Linear Mode
