DVD Surround/TV/Satellite Conections???

[bigmichael]

I am very sorry I can't remember the westinghouse code. I called dish and they had it, and of course I just punched it in my sat remote and it worked, so I didn't write it down. If you have Dish they can give it to you--I assume Direct can do the same.

My sat surround problem was that while I had the dish rec coaxial plugged into the winegaard box--so got picture and straight sound, I didn't have cables plugged into the surround system. So I ran a set of RCA plug cables from the dish sat receiver to the one last set of open RCA plugs on the JAMO surround system. And that took care of the problem. Hope this helps.

[M&S Norrell]

Surely someone has come up with a better way to deal with all these wires!!!
We have the wires from the AB switch, the DVD/Surround System, the Dish Receiver and the video control center box. There is "NO ROOM AT THE INN" up there! I think someone should be able to make them like "bungee cords" and they will go back into the wall until you pull out one of the units.
Still don't have it figured out yet and now I can't tell what I plugged in and what PI plugged in...but not getting satellite splash screen on the tv yet