Norcold N811 Frig access
I'm thinking about installing an ARP control unit on our Norcold N811 frig in our 2007 30RSO. The frig sits sideways to the exterior wall. So there is limited access from the exterior panel. There is additional access behind the toilet.
Two questions; can anyone provide insight into best approach to access the boiler tube to place the ARP sensor? Also a while back I was trying move the entire frig out of its position some to clean in the back. Got all of the front screws and the one screw in the bottom just inside of the exterior access panel. But I could not get the frig to budge out of its position. It sits on some kind foil/insulation board and seems like its settled into that layer. So how does one get this frig to move? Did Excel use a blind screw on the far bottom side that has to be removed? Any ideas.
__________________
Fred & Denise (RVM157) New Mexico
2007 Excel Classic 30RSO & Coach House 272XL E450
2007 RAM 3500, Diesel, 6Spd Auto, SWD, 4x4, CC & LB
[SIGPIC][/SIGPIC]
|