Slide alignment

[jaltemus]

We have a slide problem on our 2014 Winslow 34IKE. From the inside the dinning room slide is pinched at the top and too far out at the bottom. I'd like to make the adjustments myself. Does anyone have a procedure for such an adjustment? Attached are two photos that show the problem. Thank you!

[rockintom]

Jal, by the looks of it......you are pretty much right one here. By design the top of the slide always rub the wall and squashes the weatherstrip alot and the bottom one should have a small squash on the seal, just enough to seal the weatherstrip. If the slide is all the way out, you might could adjust the inside nut on the ram just a hair out (so the room goes out just a little more), but not much. I know it looks odd, but you're basically OK here. rockin'

[TexasTwoStep]

Originally Posted by jaltemus

We have a slide problem on our 2014 Winslow 34IKE. From the inside the dinning room slide is pinched at the top and too far out at the bottom. I'd like to make the adjustments myself. Does anyone have a procedure for such an adjustment? Attached are two photos that show the problem. Thank you!

Mine is the same way. I took it to SC and had them check it, along with some other items and they basically said this was normal and not much adjustment was needed. You can make a minor adjustment, but it didn't help mine any. If it fits in the case opening ok and is working well, I wouldn't mess with it.