Source for electrical connectors?

[EMD_Driver]

Hi all,

I'm going to try adding some white LED strips, in the fluorescent light fixtures. I would like to use the 12v connectors, like the factory used. Would anyone happen to know where I could find these critters?



I need them to plug into these:

[Lifemember]

Those are Molex power connectors. you will need a special crimping tool for them also.


http://www.amazon.com/Molex-2-Pin-Co.../dp/B004GUQ2ZM


http://www.molex.com/molex/products/...annel=products

[EMD_Driver]

Thank you!

A quick search of their site, shows 1,498 different connectors, that they produce. Might take me a while to find an exact match for what I have..

[Lifemember]

Originally Posted by EMD_Driver

Thank you!

A quick search of their site, shows 1,498 different connectors, that they produce. Might take me a while to find an exact match for what I have..

Yes, they make thousands of them. You might want to try removing pins and put your own connector on that you can find and replace the one you have

Amazon.com: Male/Female 4 Pin Molex Power Connector Pin Remover Computer Wire Extractor Tool for Modding / Wiring / Sleeving (for .062" and 0.093" pins): Electronics

[EMD_Driver]

Sounds like something I may have to do. I'm wanting to do a few 12v mods and will need connectors for most of them.

Thanks again..