Community Forums

Eric1959 · 07-21-2019, 07:26 AM

On a 2002 Damon Intruder, has anyone replaced the entire headlight assembly? How hard was it, and how did you adjust the aim?

My headlights are very cloudy, and I've tried a few methods out trying to clear them up. I have a new set coming Tuesday and would like to install them.

Thank you.

winston41 · 07-22-2019, 09:06 PM

Eric,
I've had mine out on my '05 373 2-3 times for various reasons. They are not hard to remove at all and are installed with small pieces of steel attached to the front cap. There are slots for adjustment. The install is actually kind of crude, but it works.

stew1 · 07-30-2019, 12:33 PM

Where did you get the replacement from or they the original or led

Eric1959 · 07-31-2019, 11:29 AM

I bought them off Ebay.

https://www.ebay.com/itm/NEWMAR-DUTC...V/152140393825

Hope that link works. They are NOT LED, which I don't approve of anyways on vehicle but thats just me, they are original and NEW. Was easier to replace then I thought. Getting them adjusted might be a bit hard but was told to put a board a few feet away and mark where my old ones are, then replace and do it again to adjust. Use only hand tools to adjust them as a power tool might strip the gear.