Cracks in corner trim of Slide outs

[woltz]

I have checked the above link with no luck. I am searching for a couple of these corner trim parts since I have 2 that are beyond repair. I am really hoping to find a source.
I realise this thread is old but so is my '04 Damon Daybreak.

[SteveOGilroy]

If you find a source, let me know. I also have the same issue on an 08 Astoria.

[RHR]

I have some cracked also. I have looked off and on more than once and have had no luck finding them, although I recently found some very close in shape but different width. I am also not certain what they are made of and had tried to verify it. I think they are ABS, but can't seem to find a definitive answer. May try to make some at some point. I even thought of changing out the trim to resolve it, but that just seems so drastic or extreme just to repair a few pieces which are cracked.

[Redapple]

Originally Posted by rdm

Good Day
getting ready to head south for a month
this weekend I noticed some of the corner trim pieces on the slides were cracking at the screws
this is on an 07 Tuscany
any one else have this problem
what should we do about it
thanks
Ray And Evelyn

Had the same thing on my previous mh. Took them off and hit them up with some super glue, then repainted white. Still looked good when I sold the mh.

Key is to not overtighten when replacing, use some blue loctite to keep the screws from backing out and good sealant underneath before you install. Use a wet finger to wipe away the excess.

[Evoles83]

Also looking for these as there are several missing from our 2008 Damon Tuscany.

[HarryStone]

Check with a local 3d printer. Maybe they could make something for you.