Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×
RV Trip Planning Discussions

Go Back   iRV2 Forums > THE OWNER'S CORNER FORUMS > Thor Industries Owner's Forum > Damon
Click Here to Login
Register FilesVendors Registry Blogs FAQ Community Calendar Today's Posts Search Log in
Join iRV2 Today

Mission Statement: Supporting thoughtful exchange of knowledge, values and experience among RV enthusiasts.
Reply
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on iRV2
 
Thread Tools Search this Thread Display Modes
 
Old 04-24-2017, 10:24 AM   #1
Junior Member
 
Damon Owners Club
Join Date: Jul 2015
Posts: 17
Inverter problem

I replaced the inverter that came with my 2009 Damon Astoria with a Go Power GP-3000-12. Everything has been going great until 2 nights ago. We moved to higher ground at night when the rv park started flooding. When I plugged back in I didn't have any power. So I went and unplugged and tried again. Nothing. Went to my Inverter and turned it off and then back on again. It started going through it's checks and a 5 second flash of light as if someone was welding inside the inverter and now I really have nothing! Any ideas or suggestions as to what went wrong?
Onecrazydman is offline   Reply With Quote
Join the #1 RV Forum Today - It's Totally Free!

iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!

You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!

Old 04-24-2017, 11:02 AM   #2
Senior Member
 
Join Date: Jul 2014
Posts: 35,419
Your inverter doesn't have an internal transfer switch, how did you wire it ?

If you put shore power to it, it will do bad things.

If you added a transfer switch and it transfered to inverter power, how much load was on it ? May have overloaded it.

In any case, that's not a very good inverter. It draws 2+ amps at idle and is MSW.
twinboat is offline   Reply With Quote
Reply

Tags
inverter



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Installing an Inverter in a Coach That Doesn't Have a Factory Inverter vettenuts Newmar Owner's Forum 26 07-08-2014 09:37 AM
Inverter and Inverter Remote Panel Manual EL_Carlson Winnebago Industries Owner's Forum 2 05-01-2011 05:31 PM
inverter/charger or just inverter bdawson11 RV Systems & Appliances 10 06-14-2009 09:48 AM
Simple Inverter Hook Up? Plug my 50 amp to the inverter? E Z Livin MH-General Discussions & Problems 7 12-19-2005 02:59 AM

» Featured Campgrounds

Reviews provided by


All times are GMT -6. The time now is 09:41 AM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.