Need help wiring Power Gear Leveling Touch Panel: 500675
Recently bought a 05 Damon with this same 500675 touch panel leveling system. System was intermittent. Traced to loose plug on back of touch panel. Plug actually fell off while removing the panel. The four pins of rectangular connector are all that remain of the surface mounted connector. The plastic housing that holds the pins and ensures proper orientation of the cable connector is gone. As the connector is perfectly square, I have only a 25% chance of guessing the correct orientation. I definitely DO NOT want to blow this $500 dollar board through experimentation. No manufacturer docs are helpful.
Can anyone out there with this very same touch pad and the original square connector configuration (there are several newer variations) please help me get this back together right the first time. I have attached a couple pics of my situation. The cable connector has four wires: white, red, blue, and black. Also it has a alignment/locking tang that can be used to help me orient the connector as either Up, Right, Down, or Left.
Thanks. Living lopsided til then. Cliff