Community Forums

shyattmedic · 07-10-2007, 06:30 AM

Looking to find a supplier for the V shaped part of the mounting bracket for the tv. I want a 2nd tv to use outside and not swap. Any ideas?

shyattmedic · 07-10-2007, 06:30 AM

Looking to find a supplier for the V shaped part of the mounting bracket for the tv. I want a 2nd tv to use outside and not swap. Any ideas?

E Z Livin · 07-10-2007, 11:15 AM

I do not understand the part you are asking for.

My TV is in a cabinet behind DW seat. This made my outside TV installation easy. Put TV in front bay (27") and ran the cable up thru the cabinet to a tee. I also put both of the TV's , plus DVD, Sat receiver on inverter for use with out power or running generator.

Do you have a method of putting a "T" to split off cable to second TV?

shyattmedic · 07-10-2007, 03:02 PM

I was not clear, I have a Challenger 376 (bunks in the hall) and there is a tv across the hall. The tv comes off the bracket by removing 2 thumb screws. Challenger mounted a 2nd bracket for the tv to slide into on the outside compartment including a 110v plug and cable outlet in the compartment.

What I would like to do is have a tv dedicated to the outside and need another bracket to hang it from the compartment door receiver.

Matt B · 07-11-2007, 05:24 AM

Hate to say it but not knowing who made the actual bracket you have I would recomend calling Damon. If you post a picture of what you have now I might be able to help more.