|
|
01-18-2013, 09:35 AM
|
#15
|
Registered User
Join Date: Mar 2011
Posts: 2,454
|
Quote:
Originally Posted by ChallengerRN
Does anyone notice that their large slide might be built with a bow in it. Mine is one inch out in the middle of the slide rather if it is in or out. Lets say the motors leave the slide out another 1/2 inch. Now u have a gap that will let water in. If you have your slide out just look down bottom side. Mine is easy to see bow.
|
Have not noticed but I will check the next time I am at my RV.
|
|
|
|
Join the #1 RV Forum Today - It's Totally Free!
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
|
01-18-2013, 03:57 PM
|
#16
|
Senior Member
Entegra Owners Club Spartan Chassis
Join Date: Jul 2012
Location: Mount Olive Shores North, FL
Posts: 2,548
|
Quote:
Originally Posted by ChallengerRN
Does anyone notice that their large slide might be built with a bow in it. Mine is one inch out in the middle of the slide rather if it is in or out. Lets say the motors leave the slide out another 1/2 inch. Now u have a gap that will let water in. If you have your slide out just look down bottom side. Mine is easy to see bow.
|
Have not seen that. Are you sure it is entire slide or just the trim?
__________________
Jerry - 2021 Entegra Anthem 44F
2017 Grand Cherokee
sold 2018 Entegra Aspire 42DEQ Sweet Victory
|
|
|
01-18-2013, 05:28 PM
|
#17
|
Senior Member
Join Date: Jun 2012
Location: Vancouver Island
Posts: 141
|
Mine looks pretty straight when its out, haven't looked when its in.
__________________
Jim, Lisa and Sailor, the Australian Terrier
Thor Palazzo 33.1
|
|
|
01-18-2013, 06:22 PM
|
#18
|
Senior Member
Join Date: Dec 2012
Posts: 2,080
|
100% sure it is the slide. For it to be the trim. The trim would have to be loose. Everything is as solid as a rock. U can run fingers in the middle but not on either end. And it does not bow any more as it closes. What I can't check is the top.
|
|
|
01-18-2013, 06:44 PM
|
#19
|
Senior Member
Join Date: Dec 2012
Posts: 2,080
|
100% sure it's the slide & not the trim . If it were the trim something would have to be loose. My thought is that if ones does not have a bow when it is out --for sure it wont have one when its in. Slide is one solid piece. On mine you can run your fingers in the middle but not on the ends. What I can't see is the top?
|
|
|
01-19-2013, 06:44 AM
|
#20
|
Senior Member
Entegra Owners Club Spartan Chassis
Join Date: Jul 2012
Location: Mount Olive Shores North, FL
Posts: 2,548
|
Quote:
Originally Posted by ChallengerRN
100% sure it's the slide & not the trim . If it were the trim something would have to be loose. My thought is that if ones does not have a bow when it is out --for sure it wont have one when its in. Slide is one solid piece. On mine you can run your fingers in the middle but not on the ends. What I can't see is the top?
|
Do you have a laser pointer or something nearly as good to check the underside of the slide when it is out to see how far out of alignment? Hard to understand how all that metal could have a bow.
__________________
Jerry - 2021 Entegra Anthem 44F
2017 Grand Cherokee
sold 2018 Entegra Aspire 42DEQ Sweet Victory
|
|
|
01-19-2013, 07:21 AM
|
#21
|
Senior Member
Join Date: Dec 2012
Posts: 2,080
|
It put one inch in the middle. Rather it is on or out. I said it had a bow. But it is not bowing it is built that way.
|
|
|
01-19-2013, 07:22 AM
|
#22
|
Senior Member
Join Date: Dec 2012
Posts: 2,080
|
Quote:
Originally Posted by ChallengerRN
It put one inch in the middle. Rather it is on or out. I said it had a bow. But it is not bowing it is built that way.
|
Sorry hid the by error
|
|
|
01-19-2013, 07:23 AM
|
#23
|
Senior Member
Entegra Owners Club Spartan Chassis
Join Date: Jul 2012
Location: Mount Olive Shores North, FL
Posts: 2,548
|
Just checked mine with slide in and rubber seal is firmly against side all the way across. Running my finger inside the seal I detect little difference.
__________________
Jerry - 2021 Entegra Anthem 44F
2017 Grand Cherokee
sold 2018 Entegra Aspire 42DEQ Sweet Victory
|
|
|
01-19-2013, 07:24 AM
|
#24
|
Senior Member
Join Date: Dec 2012
Posts: 2,080
|
Quote:
Originally Posted by ChallengerRN
It is out one inch in the middle. Rather it is in or out. I said it had a bow. But it is not bowing it is built that way.
|
you are right To much steel & wood to bow
|
|
|
01-19-2013, 07:34 AM
|
#25
|
Senior Member
Join Date: Dec 2012
Posts: 2,080
|
Glad to see its not supposed to have a bow. Ha but was sure it should not. Thor say they don't see how it can be. They want to see it. Hard to do when I'm out west. Take it to them next month
|
|
|
01-19-2013, 08:55 AM
|
#26
|
Member
Thor Owners Club Freightliner Owners Club
Join Date: Dec 2012
Posts: 64
|
Quote:
Originally Posted by Butte64
Any explanation on that 3-5 seconds? Seems contrary to logic of not running something past a stop point.
|
None was given...but I'm sure can call Lippert and they will tell you?
|
|
|
04-16-2013, 10:10 AM
|
#27
|
Member
Thor Owners Club Freightliner Owners Club
Join Date: Dec 2012
Posts: 64
|
Quote:
Originally Posted by ChallengerRN
Glad to see its not supposed to have a bow. Ha but was sure it should not. Thor say they don't see how it can be. They want to see it. Hard to do when I'm out west. Take it to them next month
|
Did you get that bow issue figured out?
|
|
|
04-16-2013, 10:47 AM
|
#28
|
Senior Member
Join Date: Apr 2011
Location: Powell River, B.C.
Posts: 31,500
|
Quote:
Originally Posted by bbc5
None was given...but I'm sure can call Lippert and they will tell you?
|
Lippert , has an overrunning clutch in their 18-1 gear reduction, Venture and Tucon, slide drives. So the 3>5 sec is probably to make sure that the slide is fully in. They also have a plastic drive gear in them that has a part number, but only comes in a gear package for the Venture, at an unreal price, from Lippert. $173. , $52>$65 online elsewere.
JMHO. There has to be somewhere, that supplies this plastic gear by it's self , for a reasonable price. $12>$15. I guess it's time to post this.
__________________
99DSDP 3884, Freightliner, XC, CAT 3126B, 300 HP /ALLISON 3060
2000 Caravan toad, Remco & Blue Ox.
|
|
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|