Community Forums

Trzecij · 03-02-2016, 09:28 AM

We are trying to locate the valves that shut off black and grey tanks so that we can take off the macerator and switch to the big gravity hose. Does anyone know how to do this? We think the macerator motor burned out due to running it too long. It does not make any noise when we turn it on. Unfortunately the waste tank is not empty so we are trying to avoid a large mess. Does anyone have a diagram or any help? Unfortunately we are pretty far from home so we are trying to do this at a campground. Thanks for any advice you can give us.

H3OHIO · 03-02-2016, 05:59 PM

Quote:

Originally Posted by Trzecij

We are trying to locate the valves that shut off black and grey tanks so that we can take off the macerator and switch to the big gravity hose. Does anyone know how to do this? We think the macerator motor burned out due to running it too long. It does not make any noise when we turn it on. Unfortunately the waste tank is not empty so we are trying to avoid a large mess. Does anyone have a diagram or any help? Unfortunately we are pretty far from home so we are trying to do this at a campground. Thanks for any advice you can give us.

If your setup is the same as my 2013 29.2 the valve levers are next to the switch that turns on the macerator. Should be 2 levers, one for black one for gray tank. Push them in.

Harlee79 · 03-02-2016, 10:09 PM

Also should check for a bad fuse under the bed, heavy draw will burn it out. A bad fuse will have the behavior your speaking of. If not close the valves and hookup a slinky, you'll still have a little mess just what has passed the valves. Messy but less than a bucketful. Good luck