Voyager Backup monitor

[krudawg]

I have an '08 Mandalay Coach Presidio 400. My monitor is dim and would like to replace it. Everybody I have spoken with for a replacement (one that will fit in the same hole in my dash and plug and play) they all want the model number. I'll have to remove it but have no clue how to get it out of my dash. Is there an uncomplicated way to figure out the model number of my existing unit??

[l1v3fr33ord1]

Ted-

Take a picture and then talk with Tim at RVcams. He knows his stuff!

[krudawg]

Originally Posted by l1v3fr33ord1

Ted-

Take a picture and then talk with Tim at RVcams. He knows his stuff!

Spoke with them and he said he needed the exact model which is on the rear of the monitor.

[triplewide]

You may want to add a new monitor. Probably cheaper to do. You still have to remove the old one to get to wiring most likely.

Here is a thread post on how I did mine:

http://www.irv2.com/forums/f121/ace-...ml#post3861447

[triplewide]

May not relate to your monitor. Here is how mine comes out:

https://www.youtube.com/watch?v=zy5nhx9XHgQ

[l1v3fr33ord1]

Originally Posted by krudawg

Spoke with them and he said he needed the exact model which is on the rear of the monitor.

Ted-

If you could post a couple of pictures of the monitor in the dash, we may be able to help you figure out what model it is and how to remove it.

Monaco used to provide a "build sheet" for a coach on request. Our coach's build sheet lists the in-dash monitor make and model. You could try and contact REV Group and see if they will dig your coach's build sheet out and send you a copy. According to the current Monaco Web site:

(877) 466-6226
M-F 7 AM- 4 PM, Pacific Time

I have read that REV Group is undergoing some changes that may make it difficult to reach them.

[krudawg]

Originally Posted by l1v3fr33ord1

Ted-

If you could post a couple of pictures of the monitor in the dash, we may be able to help you figure out what model it is and how to remove it.

Monaco used to provide a "build sheet" for a coach on request. Our coach's build sheet lists the in-dash monitor make and model. You could try and contact REV Group and see if they will dig your coach's build sheet out and send you a copy. According to the current Monaco Web site:

(877) 466-6226
M-F 7 AM- 4 PM, Pacific Time

I have read that REV Group is undergoing some changes that may make it difficult to reach them.

I have made several written requests to Thor for a wiring diagram of my entertainment system. They have not even given me a courtesy of a reply.
Thor took over the Mandalay Coach product. I do get recall notices from Thor but thats it

[krudawg]

Originally Posted by l1v3fr33ord1

Ted-

Take a picture and then talk with Tim at RVcams. He knows his stuff!

Here is a picture of my monitor

[triplewide]

If you are having trouble posting photos this thread may help:

http://www.irv2.com/forums/f62/forum...tml#post477709

[krudawg]

Originally Posted by krudawg

Here is a picture of my monitor

I'll try this again:

[l1v3fr33ord1]

Ted-

That looks like a Voyager AOM713WP:

http://www.asaelectronics.com/downlo...ers_manual.pdf
http://www.asaelectronics.com/downlo...ting_guide.pdf

Just a guess, though.

[krudawg]

Originally Posted by l1v3fr33ord1

Ted-

That looks like a Voyager AOM713WP:

http://www.asaelectronics.com/downlo...ers_manual.pdf
http://www.asaelectronics.com/downlo...ting_guide.pdf

Just a guess, though.

Hey Mark, thanks for the info. Do you know why most places want my model number in order to replace it? I'm betting there is very little difference between the models - Mine has 3 inputs Rear, left (When left turn-signal is on) and Right (when right turn-signal in on). Perhaps maybe the plug on the rear might be different but lets face it, if it fits in the hole, and takes 3 camera inputs most people can make it work.

[l1v3fr33ord1]

Originally Posted by krudawg

Hey Mark, thanks for the info. Do you know why most places want my model number in order to replace it?

I don't know.

[knightstorm]

Different models may use different wiring harnesses.
This is what’s behind mine.