I have a 2006 Allegro Bay on a Workhorse chassis. It has an Allison 1000 6 speed. I noticed while on a weekend trip that it is not shifting into 6th gear. (at least the dash screen says that it is not). Anyone had this happen before?
I really cannot tell exactly when this started happening. Is there a chance that it is shifting and the screen readout might be wrong?
Thanks.....
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
LEO: There should be a 3 position switch on your dash somewhere. It is probably in the "middle" position which allows 5th gear, but prevents 6th. Try switching to see which direction causes the "O/D off" light to illuminate. The opposite direction will allow 6th, but speed must also be obtained for that final upshift. Ed
Thank you Ed. Again, you saved the day. I did not realize that the switch was a three position switch. I depressed the low side of the switch and all is perfect.
Linear Mode
