Community Forums

Ziggy8321 · 03-26-2019, 11:52 AM

I am stymied!

I have been crawling all over my L9 looking for the data plate and CPL#. Everything I have read says it is on (take your pick) the valve cover, it is around the water pump, it is on the side by accessory gear. Well, you guessed it. It's gotta be obvious but I can't find it. If anyone would be kind enough to take a picture of where their's is, I'd loved to slap my head and say duhhhhh and thank you

BTW, haven't crawled under to look, figured I wait until I had proof before fighting the armadillos for the space under the motor home.

TIA

Mr_D · 03-26-2019, 12:05 PM

On my ISX it's on the very back of the valve cover on the passenger side. Easy to see if you have a side radiator, almost impossible if you have a rear radiator.

JCAT · 03-26-2019, 01:02 PM

Maybe this will help...?

Ziggy8321 · 03-26-2019, 01:20 PM

Quote:

Originally Posted by JCAT

Maybe this will help...?

Thanks Jcat, but where is that?

Ziggy8321 · 03-26-2019, 01:33 PM

I found it! I found it !

Thanks to Jcat I had an idea where to look and lo and behold, buried under two wire looms was the data plate.

joes2901 · 05-02-2019, 02:32 PM

What is the torque rating for your 350 HP L9, 1,000 or 1,150 ftlbs ?

The 2019 Verona brochure lists 1,150 ftlbs and the Verona LE brochure lists 1,000 ftlbs. This is confusing since Cummins has both available for the 350 HP L9 medium duty M2 106 chassis.

Ziggy8321 · 05-02-2019, 03:09 PM

Quote:

Originally Posted by joes2901

What is the torque rating for your 350 HP L9, 1,000 or 1,150 ftlbs ?

The 2019 Verona brochure lists 1,150 ftlbs and the Verona LE brochure lists 1,000 ftlbs. This is confusing since Cummins has both available for the 350 HP L9 medium duty M2 106 chassis.

2018 was 1000 ft lbs but mine will soon be 1150. Plan on having it done in a week or so.