Since day one I have had a lot of road noise around the door. I have added weather stripping around the door that made a some difference. The door fits perfectly and is tight at this time. Today I removed the interior trim strip. While somewhat centered in the opening there was a gap of approx . 2”
on one side. I chinked fiberglass insulation
all the way around the door opening Quick road test proved a much quieter door. If you have a lot of road noise you might check under that door trim? There is nothing between the exterior aluminum trim
and the interior so just from a cool/heat perspective it is worth insulating this void. Thanks, Ron G.
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
Sorry, I did not take any photos. Just unscrew the 12’ish screws and the trim comes right off.
Did you fill the void with expanding foam? Or?? Thanks Bruce
__________________
The world could be fair or round 06 Gulfstream Conquest Super C - 6340 8.1 Gas
17 Renegade Verona 36 VSB (Cummins ISL/M2 Chassis) 4 x 100ah AGM , 400w solar, ScanGaugeD
I used fiberglass insulation Deputy. My wife has taken the foam can away from me!!! Please read a previous post of mine where foam got me in deep trouble!!!!
Oh yeah I remember... Thanks for the clarification
__________________
The world could be fair or round 06 Gulfstream Conquest Super C - 6340 8.1 Gas
17 Renegade Verona 36 VSB (Cummins ISL/M2 Chassis) 4 x 100ah AGM , 400w solar, ScanGaugeD