|
|
01-15-2014, 07:01 PM
|
#43
|
Senior Member
Join Date: Sep 2012
Posts: 1,177
|
brad make sure you go on ebay for the rubber roof
you can get all your EPDM roofing for under 140 to 180$ then a can of glue for 90$
i did all of my roof for under 200$ with glue but i used TPO holds up better and thicker
i have did 5 RVs roofs befor in EPDM and TPO is alot better and dos not chock
but TPO you have to take your time and clean it good when installing and cocking
|
|
|
|
Join the #1 RV Forum Today - It's Totally Free!
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
|
01-15-2014, 08:59 PM
|
#44
|
Member
Join Date: Mar 2013
Posts: 68
|
bob we met at the belvidere oasis. you was nice enough to give me some dome lights.
|
|
|
02-11-2014, 08:44 PM
|
#45
|
Member
Join Date: Jan 2014
Location: South West Florida
Posts: 37
|
Excellent Choice in insulation! Thats stuff is incredible. It will actually strengthen your entire box as well.
|
|
|
02-12-2014, 08:24 PM
|
#46
|
Member
Join Date: Mar 2013
Posts: 68
|
towed in a wrecked truck for the body shop yesterday. now the have both sides of siding on about 1/2 way. 2nd side they did looks alot better. said they were going to try to straighten 1st side out better.
|
|
|
02-16-2014, 04:21 AM
|
#47
|
Senior Member
Join Date: Jul 2013
Location: Incheon, S. Korea
Posts: 203
|
Wow...
|
|
|
02-16-2014, 11:27 AM
|
#48
|
Senior Member
Join Date: Aug 2008
Location: Georgia
Posts: 8,638
|
That's what you call building a MH from scratch WOW.
__________________
2007 Fleetwood Revolution LE 40V
|
|
|
06-15-2015, 05:06 PM
|
#49
|
Member
Join Date: Mar 2013
Posts: 68
|
well after out a year and a half at body shop vary little got done. he put siding on and thats about it. picked it back up in end of march i think when he closed his doors. he has been coming to our shop now and working on it. have bathroom, kitchen and rear 3 windows put in. started putting lower rails on to hold sides on. another guy came today and put roof on. things should start going a lot faster now. will post pictures tomorrow.
|
|
|
06-15-2015, 05:07 PM
|
#50
|
Member
Join Date: Mar 2013
Posts: 68
|
they also put in roof vents and antenna today.
|
|
|
06-17-2015, 09:39 AM
|
#51
|
Senior Member
Join Date: Feb 2009
Location: St. Paul, MN
Posts: 412
|
Glad to hear it's still moving forward, Dave! Keep the pictures coming. Saw some over at Truck Conversions forum but how come you were laying down taking them? Hahahaha, just razzin' ya.
|
|
|
06-20-2015, 08:42 PM
|
#52
|
Member
Join Date: Jun 2015
Posts: 86
|
Looking good!! Keep it up!
|
|
|
02-07-2016, 07:27 AM
|
#53
|
Member
Join Date: Jan 2016
Posts: 55
|
I'm not sure if you have already found a solution to the bed lift problems you are having .
I am the owner of a Garage door co.
You are winding the drums backwards.
Your cable must rap from the large side of the drum to the small side.
In that way as the bed lifts and the spring un winds ( loses tension ) the power from the drum increases due to it's reduced diameter.
If you are using the correct springs for the weight you will be able to achieve balance and full travel.
|
|
|
03-05-2017, 09:28 AM
|
#54
|
Junior Member
Join Date: Aug 2011
Posts: 12
|
Awesome project, i have a neighbor who does the same type of work
|
|
|
06-29-2017, 07:20 PM
|
#55
|
Junior Member
Join Date: May 2016
Location: Evansville, IN
Posts: 4
|
Great work.
I love these kind of projects.. Keep up the good work..
|
|
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|
All times are GMT -6. The time now is 04:26 AM.