 |
09-15-2020, 04:45 PM
|
#1
|
|
Member
Winnebago Owners Club Workhorse Chassis Owner
Join Date: Mar 2017
Location: Drumbo, Ontario
Posts: 92
|
ABS & ATC warning lights on
Both lights are on when driving my UFO. What/How must I check or look for? Thank you friends.
__________________
Travelling with my wife Rita, and our Havanese Ambre, in our 2008 Winnebago/Itasca Latitude 39W, Workhorse UFO R26 Chassis, GM Vortec 8.1, Allison 6 spd. and 2016 Chev. Equinox LT in tow.
|
|
|
 |
Join the #1 RV Forum Today - It's Totally Free!
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
|
|
09-15-2020, 05:16 PM
|
#2
|
|
Senior Member
Monaco Owners Club Workhorse Chassis Owner
Join Date: Aug 2002
Location: Clovis, CA, USA
Posts: 13,154
|
https://www.irv2.com/forums/f258/int...ht-324815.html
That thread discusses the Automatic Traction Control ATC problem.
__________________
2004 Monaco La Palma 36DBD, W22, 8.1, 7.1 MPG
2000 LEXUS RX300 FWD 22MPG 4020 LBS
Criticism is easier than Craftsmanship
|
|
|
|
|
09-15-2020, 05:17 PM
|
#3
|
|
Senior Member
Winnebago Owners Club Workhorse Chassis Owner
Join Date: Aug 2007
Location: Sonoma County, CA
Posts: 6,401
|
Disconnect the Chassis battery ground, wait a minute and then reconnect. That is how I cleared the message on my UFO chassis when it happened.
__________________
Wayne & Roberta
08 Winnebago Destination 39W Gas UFO Workhorse Chassis......It's really weird being the same age as old people. I thought getting old would take much longer.
|
|
|
|
|
09-15-2020, 05:41 PM
|
#4
|
|
Senior Member
Join Date: Jan 2017
Posts: 7,494
|
I had a similar issue with my UFO and it was a wheel speed sensor.
What UFO Pilot says should work, failing that would be to find a shop that has the Wabco Toolbox software to perform a diagnosis.
__________________
2008 Phoenix Cruiser 3100
2012 Jeep Wrangler Sahara JKU.
|
|
|
|
|
09-18-2020, 07:26 AM
|
#5
|
|
Senior Member
Join Date: Jul 2015
Location: Watertown NY USA
Posts: 6,531
|
Wheel speed sensor
That would be my first guess also.
I wouldn't try clearing the fault light until I had the vehicle diagnosed with a scan tool for codes and a road test which should show which sensor is at fault.
Some diagnostic scan tools will retrieve history codes while some will not. If the code is erased you are back to guess work unless you can see the sensor output in the data screen. In the case of an intermittent problem with the sensor you might be chasing your tail if you clear the code before diagnosis.
Lynn
__________________
2002 Fleetwood Storm 30H on Workhorse P32 chassis 8.1 gas.
|
|
|
|
|
09-20-2020, 03:38 PM
|
#6
|
|
Member
Winnebago Owners Club Workhorse Chassis Owner
Join Date: Mar 2017
Location: Drumbo, Ontario
Posts: 92
|
I decided to remove and clean the wheel sensors. The front were easy to remove and clean. For the life of me I could not remove the rear ones. Should I blast them with PB Blaster penetrating?
__________________
Travelling with my wife Rita, and our Havanese Ambre, in our 2008 Winnebago/Itasca Latitude 39W, Workhorse UFO R26 Chassis, GM Vortec 8.1, Allison 6 spd. and 2016 Chev. Equinox LT in tow.
|
|
|
|
|
09-20-2020, 06:02 PM
|
#7
|
|
Senior Member
Join Date: Jan 2017
Posts: 7,494
|
Quote:
Originally Posted by NCY-UFO
I decided to remove and clean the wheel sensors. The front were easy to remove and clean. For the life of me I could not remove the rear ones. Should I blast them with PB Blaster penetrating?
|
Hi,
Are you on the Facebook UFO owners group?
__________________
2008 Phoenix Cruiser 3100
2012 Jeep Wrangler Sahara JKU.
|
|
|
|
|
09-20-2020, 06:21 PM
|
#8
|
|
Member
Winnebago Owners Club Workhorse Chassis Owner
Join Date: Mar 2017
Location: Drumbo, Ontario
Posts: 92
|
Yes
Quote:
Originally Posted by Unicorn Driver
Hi,
Are you on the Facebook UFO owners group?
|
Yes. I am Noel. I think you are Duane?
__________________
Travelling with my wife Rita, and our Havanese Ambre, in our 2008 Winnebago/Itasca Latitude 39W, Workhorse UFO R26 Chassis, GM Vortec 8.1, Allison 6 spd. and 2016 Chev. Equinox LT in tow.
|
|
|
|
|
09-20-2020, 06:24 PM
|
#9
|
|
Senior Member
Join Date: Jan 2017
Posts: 7,494
|
Quote:
Originally Posted by NCY-UFO
Yes. I am Noel. I think you are Duane?
|
Cool,
Not Duane, will pm you.
__________________
2008 Phoenix Cruiser 3100
2012 Jeep Wrangler Sahara JKU.
|
|
|
|
|
09-20-2020, 06:35 PM
|
#10
|
|
Member
Winnebago Owners Club Workhorse Chassis Owner
Join Date: Mar 2017
Location: Drumbo, Ontario
Posts: 92
|
Quote:
Originally Posted by Unicorn Driver
Cool,
Not Duane, will pm you.
|
It is stephen. Sorry for incorrect group member...
__________________
Travelling with my wife Rita, and our Havanese Ambre, in our 2008 Winnebago/Itasca Latitude 39W, Workhorse UFO R26 Chassis, GM Vortec 8.1, Allison 6 spd. and 2016 Chev. Equinox LT in tow.
|
|
|
|
|
09-20-2020, 06:49 PM
|
#11
|
|
Senior Member
Join Date: Jan 2017
Posts: 7,494
|
Quote:
Originally Posted by NCY-UFO
It is stephen. Sorry for incorrect group member...
|
That's cool :-)
__________________
2008 Phoenix Cruiser 3100
2012 Jeep Wrangler Sahara JKU.
|
|
|
|
|
09-21-2020, 05:13 AM
|
#12
|
|
Senior Member
Join Date: Jul 2015
Location: Watertown NY USA
Posts: 6,531
|
Quote:
Originally Posted by NCY-UFO
I decided to remove and clean the wheel sensors. The front were easy to remove and clean. For the life of me I could not remove the rear ones. Should I blast them with PB Blaster penetrating?
|
Before you damage a sensor or both sensors are you sure the sensors are your problem?
Lynn
__________________
2002 Fleetwood Storm 30H on Workhorse P32 chassis 8.1 gas.
|
|
|
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Linear Mode
