Community Forums

datedd · 03-13-2021, 06:51 PM

I have the auto park actuator Haldex Part Number N36000B that was just shipped to my home because the old unit is leaking. I have the 1993 Pace Arrow P30. What is involved in replacing this unit? I have seen other postings of individuals replacing them after adding seals, etc. but no mention of the procedure. I can see how it's attached to the frame with fluid lines and the cable. Because it's part of the hydro boost system sharing from the power steering reservoir, does the system need to be bled? I this a very BIG job?

Please let me know your experiences for those who have performed this installation.

Thanks.

edgray · 03-13-2021, 08:03 PM

LOTS of good info about the J71 AAPB can be found HERE: AutoPark parking brake system help, troubleshooting, and repair

Hope this helps and wish you good luck.

datedd · 03-13-2021, 11:30 PM

I don’t see anything that discusses the procedure for removing the old one and installing the new one . It just discusses leaking ones and seals, etc.