Simulator Lug nut cover

[riverat]

Does anyone have information on where to purchase the stainless steel simulator lug nut covers on the 22.5 wheels? I have looked on ebay and can only find a 1 1/2 x 2 and I need a 1 5/8 x 2. Thanks

[samschudi]

Actually found mine at a TA truck Stop in Rogers MN. Seen those at other truck stops too.

[DriVer]

Originally Posted by riverat

Does anyone have information on where to purchase the stainless steel simulator lug nut covers on the 22.5 wheels? I have looked on ebay and can only find a 1 1/2 x 2 and I need a 1 5/8 x 2. Thanks

I replaced all my lug nut covers (3 per wheel) with new chrome nut-covers. The cover is pinched onto the nut so both come off at the same time. They look much better than the stand alone removable covers and the rusty jamb nuts that I replaced. I got these from Larry's Auto Clinic in Myrtle Beach.
One of the reasons why I replaced the covers was that I was having the same challenge, finding replacements.

[g-royster]

I purchased new nuts w/covers from here: https://www.rvupgradestore.com/Dicor...-p/17-0994.htm

[pcurt23]

Jam nut
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1

Cover
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1

[riverat]

Originally Posted by g-royster

I purchased new nuts w/covers from here: https://www.rvupgradestore.com/Dicor...-p/17-0994.htm

So does the Workhorse Chassis with 22.5 wheels come with Dicor ss wheel simulators? I cant find a name on mine. Thanks for the info

[DriVer]

Originally Posted by riverat

So does the Workhorse Chassis with 22.5 wheels come with Dicor ss wheel simulators? I cant find a name on mine. Thanks for the info

A Workhorse comes from Union City with 2 wheel options. These are steel wheels, painted gray for the most part OR Alcoa aluminum wheels.

The wheel liners (stainless steel covers and nut covers) are installed by the coach builder and were not supported by Workhorse.