Community Forums

Noleakman · 08-22-2008, 03:04 PM

I just purchased new wiper blades and arms for my 06 National Sea Breeze W22! The arms and blades are the right length but the hole in the arm is different! Mine has a screw and a nut Is there a special one for that? I thought I read someone new the Napa part number for the right refills any help would be appreciated

Noleakman · 08-22-2008, 03:04 PM

I just purchased new wiper blades and arms for my 06 National Sea Breeze W22! The arms and blades are the right length but the hole in the arm is different! Mine has a screw and a nut Is there a special one for that? I thought I read someone new the Napa part number for the right refills any help would be appreciated

edgray · 08-22-2008, 05:45 PM

I'm going to link your question to the National RV forum in hopes of getting you an answer. ED

Fred and Bonnie · 08-22-2008, 08:05 PM

I believe NRV used Denso wiper blades in two sizes. I am not sure of the longer legnth, however I feel fairly confident your unit uses a 22" wiper refill. Denso part #LA060112-3650. I did a Google search several months ago and they were available on Ebay.

Fred

Mike Canter · 08-23-2008, 04:33 AM

Here is a link to the Denso Heavy Duty RV wiper blade catalog. They make the motor and drive for most of the NRV Motorhomes.
http://www.densoheavyduty.com/catalo...talog%2008.pdf

The part number LA060112-3560 is just for the refills for that 2006 Sea Breeze. The whole blade is Denso part # LA160100-8780

They are available from
http://www.rvparts.com/ProductPage.a...8-LA1601008780
and
http://www.pplmotorhomes.com/

You can also go here for the more available Trico blade
http://www.tricoproducts.com/wr_clas...ocation_id=352

The Trico part number for a 2006 Sea Breeze is 67-221, the refil for that is 45-210

For Interest here is a True Vision Wiper blade catalog for RVs
http://www.rvshop.com/catalog/images...erFitChart.pdf

Bill Davis · 08-23-2008, 07:30 AM

Mike, thanks a lot for this valuable information. This is why people "keep coming back" to IRV2.

two2go · 08-23-2008, 09:06 AM

In the process of replacing my blades, I dropped one of the mounting screws. Never found it. I used Pylon 24" replacement blades with the bolt hole adapter and used a bolt with a panel nut to fasten to the arm. The extra 2" of blade gives a little more area to see through.

Mike Canter · 08-23-2008, 10:35 AM

Two2go, those screws you lost are listed on page 49 of the Denso catalog I posted above. Mine riusted away and I found some from a Winniebago dealer that worked before I found the Denso catalog.

Lynxgolfer · 09-10-2008, 05:48 AM

Try the new flex ones - I think either Rainex or Michelin - they are at Wal Mart - about $15 a piece. I bought two wipers like you bought and drilled holes and they didn't wipe the windshield clean and even - I got the flex ones at Wal Mart - holes in the center and they contour to your windshield.

edgraf36 · 09-13-2008, 04:30 PM

Try removing your blades and then take them to a truck parts supplier. If the hole is to small droll it out Taakes10 min and cost of parts is 25% of Denso