Brazels RV Performance, a sponsor of irv2, will be on site at the Natl Rally in July, to install their Ultrapower in both the V10 chassis and the Workhorse chassis.
You can view their site
HERE
An in depth question and answer post is in the Workhorse forum.
SEE HERE
Mike or Steve from Brazel's will monitor this post as well and answer any specific questions us V10 owners may have.
Now of course, you can still get this upgrade without going to the rally, but for those of us going or thinking of going, it is a great opportunity to get the unit installed and at some discount to the regular price.
What I can tell you is that there is approx a 35 HP and a 40 FT lb. torque improvement with this set up. Mileage increase of approx. 1 1/2 to 2 MPG can also be expected. It is designed to improve the performance in the cruise speed and RPM range. The peak horsepower and torque is around 3500RPM which would be around 60MPH with overdrive off. Good for climbing hills.
I for one am planning on getting this upgrade.
There will be a seperate sign up post both in this forum and the Natl rally forum. You only need to sign up on either one of the sheets.
Please identify if you have the Ford or the Workhorse chassis. As mentioned in the Workhorse forum discussion, Brazel RV will only be doing the Ultrapower upgrade on site. You can discuss with them any other items that you want to purchase from them.
Mike
repair title
Linear Mode
