This may same like a small annoyance to some of you but it drives me nuts. I've got a 2007 E450 chassis under my 2008 Fleetwood.
The issue I'm having is the windshield washers. The spray nozzle on the drivers side shoots over the windshield on to the coach overhang. The passenger side spray nozzle just flows out onto the trim between the hood and windshield. There are no system leaks on the tank or tubing.
I was wondering if any of you have ever torn into this problem? How much of a PITA is it?
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
If you can find a stiff wire that fits the TINY hole, you can often move/aim the nozzles, but from memory, most are SMALLER THAN the common smaller paper-clip wire? Maybe something off a wire brush? May take some searching?
I have used a sewing needle to move the nozzle. Just don't push it in too hard so as the hole gets distorted.
Quote:
Originally Posted by THenne1713
If you can find a stiff wire that fits the TINY hole, you can often move/aim the nozzles, but from memory, most are SMALLER THAN the common smaller paper-clip wire? Maybe something off a wire brush? May take some searching?
__________________
Keith
2012 Tiffin Allegro Open Road 35QBA
2014 Jeep Trailhawk
Linear Mode
