2000 monaco dynasty coolant temperature sender

[vmrothy]

need to replace the coolant temperatue ,sender any idea for part number, looks like a oil presure sender with 2 wires

[jacwjames]

This is what is on mine, it is located top of engine pulley end

[vmrothy]

need a replaement sender for dash temp guage

[jacwjames]

Looks different then mine


Only suggestion would be to remove and see if you can clean to get a number off of it.


You will learn the Monaco's are SnowFlakes, no two are alike

[Lowflyer1]

What engine do you have? Someone with the same engine might now.

That pic sure looks like an oil pressure sender.

[jacwjames]

Attached is my oil pressure sender.



Again, there are two, one for the dash gauges that Monaco installed, which is the one attach.


The second one is installed by Cummins, which is installed passenger side above the starter.

[vmrothy]

found coolant sensor driver side by towards the transmission, the picture is the oil sender. thanks