Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×
RV Trip Planning Discussions

Go Back   iRV2 Forums > THE CHASSIS CLUB FORUMS > Roadmaster Motorhome Chassis Forum
Click Here to Login
Join iRV2 Today

Mission Statement: Supporting thoughtful exchange of knowledge, values and experience among RV enthusiasts.
Reply
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on iRV2
 
Thread Tools Search this Thread Display Modes
 
Old 07-22-2022, 08:54 AM   #1
Senior Member
 
tmw188's Avatar


 
Monaco Owners Club
National RV Owners Club
Workhorse Chassis Owner
Join Date: Dec 2013
Location: St. Charles MO
Posts: 4,702
Send a message via AIM to tmw188
Ride Height for ‘02 40’ Windsor

Just to verify some info I have is correct? It’s actually for 98 Dynasty I doubt it’s the same for the ‘02 Windsor?

Rear 11”
Front 9.5”
__________________
2002 Monaco Windsor 40PST 2019 Equinox 1.5L, Blue OX Aventa LX tow bar, Roadmaster EZ5 baseplate, SMI Stay-In-Play Duo, TireSafeGuard TPMS
tmw188 is offline   Reply With Quote
Join the #1 RV Forum Today - It's Totally Free!

iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!

You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!

Old 07-22-2022, 11:36 AM   #2
Senior Member
 
tmw188's Avatar


 
Monaco Owners Club
National RV Owners Club
Workhorse Chassis Owner
Join Date: Dec 2013
Location: St. Charles MO
Posts: 4,702
Send a message via AIM to tmw188
Since posting I did find and verified those dimensions as being correct.
__________________
2002 Monaco Windsor 40PST 2019 Equinox 1.5L, Blue OX Aventa LX tow bar, Roadmaster EZ5 baseplate, SMI Stay-In-Play Duo, TireSafeGuard TPMS
tmw188 is offline   Reply With Quote
Old 07-23-2022, 02:27 PM   #3
Senior Member
 
jacwjames's Avatar
 
Monaco Owners Club
Join Date: Jun 2014
Posts: 11,701
When I checked my ride height on my 2002 Windsor I cut a piece wood to check the height. I did the back first and got the side to side real close, then cut the wood to the 9.5" to do the front.

Mine was close to start with, just took some minor adjustments.
__________________
Jim J
2002 Monaco Windsor 38 PKD Cummins ISC 350 8.3L
2005 Jeep Grand Cherokee w/5.7 Hemi
jacwjames is offline   Reply With Quote
Old 07-23-2022, 06:18 PM   #4
Senior Member
 
tmw188's Avatar


 
Monaco Owners Club
National RV Owners Club
Workhorse Chassis Owner
Join Date: Dec 2013
Location: St. Charles MO
Posts: 4,702
Send a message via AIM to tmw188
Quote:
Originally Posted by jacwjames View Post
When I checked my ride height on my 2002 Windsor I cut a piece wood to check the height. I did the back first and got the side to side real close, then cut the wood to the 9.5" to do the front.

Mine was close to start with, just took some minor adjustments.


Good idea. I’m sitting low on the drivers side that I need to look at.
__________________
2002 Monaco Windsor 40PST 2019 Equinox 1.5L, Blue OX Aventa LX tow bar, Roadmaster EZ5 baseplate, SMI Stay-In-Play Duo, TireSafeGuard TPMS
tmw188 is offline   Reply With Quote
Old 07-25-2022, 07:21 AM   #5
Senior Member
 
jacwjames's Avatar
 
Monaco Owners Club
Join Date: Jun 2014
Posts: 11,701
I had to do some work on my air system, all my PPV's were leaking. I didn't want to have to rely on the jacks plus I needed extra height to access under the axles so I built 6 amps out of 2X10" lumber cut into 48, 42, 36, 30" pieces, screwed all together and then added a block at the end hopefully stop me from backing off.

These worked great, lifted the coach 6" higher. I have a garage with concrete floor so had a good place to check the ride height without worrying about it dropping air.

I was able to loosen the arm nut and slightly move the arm to raise/lower the coach. Not as complicated as I was expecting.
__________________
Jim J
2002 Monaco Windsor 38 PKD Cummins ISC 350 8.3L
2005 Jeep Grand Cherokee w/5.7 Hemi
jacwjames is offline   Reply With Quote
Old 07-25-2022, 07:31 AM   #6
Senior Member
 
153stars's Avatar
 
Join Date: Mar 2019
Location: Braidwood Il.
Posts: 5,911
This is what I have I believe there was a change of where you measure between H frame 11" from to just bag pads. Maybe someone can verify. I know I have more info/instructions under different than ride height. Attachment 371886Attachment 371887Attachment 371888Attachment 371889Click image for larger version

Name:	Screenshot_20220725-082703.jpg
Views:	12
Size:	64.3 KB
ID:	371890
__________________
95 Monaco Crown Royale
M11 400hp, 4060 trans.
Aquahot, Generac Guardian7.5k
153stars is offline   Reply With Quote
Old 07-25-2022, 07:38 AM   #7
Senior Member
 
153stars's Avatar
 
Join Date: Mar 2019
Location: Braidwood Il.
Posts: 5,911
See if these are cleaner image . I don't why coming out so poorly.Attachment 371893Attachment 371894Click image for larger version

Name:	Screenshot_20220725-083732.jpg
Views:	17
Size:	43.9 KB
ID:	371895
__________________
95 Monaco Crown Royale
M11 400hp, 4060 trans.
Aquahot, Generac Guardian7.5k
153stars is offline   Reply With Quote
Reply

Tags
ride, ride height, wind, windsor



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
2001 Monaco Windsor ride height valve F7nsnp12 Roadmaster Motorhome Chassis Forum 2 05-07-2019 08:07 PM
Ride Height Valve - 2003 Monaco Windsor Coreyph Monaco Owner's Forum 4 11-16-2017 04:50 PM
2003 Monaco Windsor Ride Height Coreyph Monaco Owner's Forum 5 05-20-2017 03:29 PM
Ride Height Valve for 04 Windsor speerfamily Monaco Owner's Forum 3 05-20-2015 09:10 AM
Ride height 96 32' Windsor rdelcamp Roadmaster Motorhome Chassis Forum 5 04-11-2013 09:04 AM

» Featured Campgrounds

Reviews provided by


All times are GMT -6. The time now is 09:51 PM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2022, vBulletin Solutions, Inc.