Hi
my 2019 coachmen Mirada 29v full wall slide wont work sometimes. I plug and unplug controller, set and unset the e brake and still wont work, I start up motorhome set e brake on/off shut her down then it works. The slide when working works great and has been trouble free.
anyone had similar problem? thanks
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
I was having the same problem with my HWH 325 hydraulic living room slide (13' wide). You don't mention the brand and model or type of your slide which would help.
Anyway, my son climbed under the slide and found that the nylon glides under there were dry, sprayed them liberally with silicone lubricant and it started working again. We've decided on using graphite powder on the glides.
__________________
'02 Winnebago Journey DL, DSDP, 36' of fun.
llippert slide controller no codes
i traced it down to an intermittant power supply problem. turns out it was a bad relay. took me 4 hours a call to lippert foe wireing diagrams and voltage checks...
: 
Linear Mode
