Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×
RV Trip Planning Discussions

Go Back   iRV2 Forums > THE OWNER'S CORNER FORUMS > Forest River Owners Forum
Click Here to Login
Join iRV2 Today

Mission Statement: Supporting thoughtful exchange of knowledge, values and experience among RV enthusiasts.
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on iRV2
Thread Tools Search this Thread Display Modes
Old 01-07-2022, 03:35 PM   #1
Junior Member
Join Date: Jan 2013
Posts: 18
Bedroom slide in 2021 Sunseeker 3010ds

When we extend the bedroom slide the vertical trim on the right side tilts in towards the bed. The tilting has caused the horizontal trim at the top on that end to pull away. I read something about synchronizing the motors by holding the button down longer once the slide is extended and retracted. We tried that today but I'm not sure that helped at all. Anyone have any ideas about what's going on?
Harley Danny is offline   Reply With Quote
Join the #1 RV Forum Today - It's Totally Free! RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!

You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!

Old 02-04-2022, 08:14 PM   #2
Senior Member
Stevegd007's Avatar
Forest River Owners Club
Ford Super Duty Owner
Join Date: Mar 2005
Location: San Diego County, California
Posts: 855
There should be a 4X6 black box under the bed, under a lift out panel. This is the controller for the motors for the bed slide. Now there is a small reset button inside the box. Use a small screw driver and push this button six time and the led lights should flash. You have 15 seconds to reach the room slide switch and push the room out and then back in. Do this a couple of times. The motors should then be resynced
This also works, if the room slide just suddenly quits or begins to move at different speeds and appears to come in crooked.
Steve & Leslie
Forest River 2018 Forester 3011DS
Honda 2010 CR-V AWD "Toad"
Stevegd007 is offline   Reply With Quote

slide, sunseeker

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
SunSeeker :: 2017 SunSeeker 3010DS Gidyupgo iRV2 Owners Registry 0 07-03-2018 05:31 AM
Forest River 3010DS Sunseeker vs Coachman Leprechaun 319MB Larry Mac01 Class C Motorhome Discussions 3 05-21-2016 11:59 AM
New 2016 sunseeker 3010DS BigMac06 Forest River Owners Forum 1 07-15-2015 11:46 AM

» Featured Campgrounds

Reviews provided by

All times are GMT -6. The time now is 03:50 AM.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2023, vBulletin Solutions, Inc.