Laminate Flooring in Vibe

[Desdinova]

So we have a laminate floor in the vibe. It appears to be good quality, but, in the hall, it's lifting. I can stand on it, and it returns flat so I'm assuming they missed a spot with the glue or whatever. Unlike a home where there is floor molding, it appears the walls are on top of the flooring so no access to edges, unless maybe if I take the steps to the outside off, there might be access under the sill.

I was thinking of drilling a small hole and shooting some epoxy in, then weighing it down. Then of course finding something to patch the tiny hole, but that shouldn't be too hard.

Does anyone else have any better ideas?

[mjf55]

Might try a slit with a sharp knife. That way there is no missing material ( hole ) to fill. Go with the grain ( assuming wood grain flooring, like mine ) and you wo t even see the slit.
Do test in a hidden area ( under a cabinet)

This is what I would try.

[Desdinova]

Originally Posted by mjf55

Might try a slit with a sharp knife. That way there is no missing material ( hole ) to fill. Go with the grain ( assuming wood grain flooring, like mine ) and you wo t even see the slit.
Do test in a hidden area ( under a cabinet)

This is what I would try.

Excellent idea !!! Yes a slit would enough to slide in a BBQ/Basting needle easily and would disappear Thank you !!!

[mjf55]

You're welcome. I also just saw ( on pinterest ) to use a syringe to inject the glue where you need it. That may also help. Let us know how it works out.