Originally Posted by Rhilmer
I bought a new 2021 Forest River Georgetown. The first time I used it we couldn't keep the indoor temp at 70deg. It got down to 58deg inside. The temp outside was only 38deg here in Texas during those days in January. When I got home from the Dealer I put it in the storage facility for 10 days prior to the little "shakedown" trip. The storage facility had electricity and before I left everything was running. The Dealer told me they would have to reset the controls. How did the controls get out of whack when I went from the Dealer to the Campsite in less than 10days?
This is not the optimum forum to ask. Consider asking over here: https://www.forestriverforums.com/forums/f16/
as some factory people monitor it and there are a lot more Georgetown owners there.
Likely, your dealer has not a frggin' clue. People have reported issues with the new Precision Plex touchscreen tie-in to the heating and ventilation system, such as units staying on and never shutting off and the front and back temperature sensors being swapped. One person said they had to have a circuit board changed.
To "reset" the Precision Plex system, just kill all power to the coach. The thing reboots itself on each power-up of the 12 volt system. There are other ways to do that but that's the simplest. If you see the touchscreen restarting, you did it correctly.
If you do not have a login over there, just use the same email address and password as you use here because both forums are owned by the same company. It will find your account, you'll setup your profile and you'll be good to go.