Rockwood 2509s Slide won't extend.
2018 Rckwd MiniLite 2509s ... Retracted Slide and now it won't extend back out. Called Lippert, and they said it could be a auto reset breaker. However, I am unable to locate the breaker. I seem to have voltage at the sw but still no response from the sw. when pushed. Usually, there is audible click from the slide when it is fully in or out. But this time no click. I checked under the slide and the stop can on the rack is against the frame. So it is fully closed. I am at a loss as to what has occurred. I just purchased the TT and I would not think, as lightly used as it was, the motor would be out... To get to the motor I will have to open the undercarriage cover, and not knowing the location of the motor, I will be costly to replace the whole cover. Has anyone had any issues similar to this, or have any trouble shooting suggestions??? I am unable to locate any fuses in the converter that are blown and unable identify positively which if any are for the slide???