Shower Door Adjustment

[WTB]

2016 Sunseeker. The shower door is no longer square to the frame making it hard to open and close. At the top, looking at it, on the left is a gap of about an inch, and on the right there is a gap of about half an inch. Is there any way to adjust the door and again get it square to the frame? Thanks in advance

[ByeTheWay]

Having the same issue, I adjusted the door frame instead of the door. With trial and error I pushed on the glass shower enclosure to see if it helped the door. I had a closet to the left of the door. The glass shower enclosure was in alignment at the bottom but not at the top. To keep it in alignment I drilled a hole thru the shower aluminum enclosure and into the closet using a short piece of 1/4-20 all thread and lock nuts to pull the shower enclosure into alignment. I placed acorn nuts on each end of the all thread. It has worked fine for several years.

[ByeTheWay]

^^^^^^ My closet was less than 4" from my shower.