iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
Might work best if you did some calling, it would be super lucky if someone here just happened to know of a Forest River Tsunami in a salvage yard. But, hey, stranger things have happened. Meanwhile, check this out.
Thank-you for the reply. I’m currently upwards of 25 calls to various salvage yards without success. The few FR dealers I’ve tried get the same NLA response from the FR parts dept. Also looking into custom AL extrusion and 3D metal printing although there are size limitations with the later. Short term I may just Rube Goldberg a piano hinge as I leave for warmer weather soon. If anyone has other ideas … I’m all ears!
Pictures of bus fixed hinge rail and electrical bay door hinge rail. 1st pic is a good hinge. 2nd & 3rd show damage. Bay door is fine … just need the hinge rails.
Kinda looks like a gull wing extruded aluminum form. Measure the profile carefully, make a dimensional drawing then check with these guys for your shape: AL Trailer Trim
Sorta doubt that you'd need to got custom. Might take some time, but you should be able to find it online eventually. See the manufacturers don't wanna pay extra for anything so they use off-the-shelf components...even the trim pieces.
__________________
'02 Winnebago Journey DL, DSDP, 36' of fun.
: 
Linear Mode
