Next time you travel in your RV, do not forget your Chair Buddy! The Chair Buddy connects to your dinette table and holds onto your chairs so that they do not knock around while you are traveling.
- Eliminates bulky, awkward straps.
- Conveniently secures dinette chairs.
- Prevents interior damage.
- Dinette table assumed to be standard 30” in height from underside of the table with standard 17”-19” chairs.
- Table post must have a flat surface parallel to the side of the table where the chairs are stored and it must be at least a 2” wide x 4” tall mounting area.
- Chair Buddy TM should be mounted as high as possible and centered on the table post.
- A minimum distance of 8.56” is required between the mounting bracket on the post and the inner face of the rail if one is present.
- If the table is a sliding table, Chair Buddy should be mounted low enough so the table can move without Chair Buddy TM interfering; however, the minimum distance from the bottom of the mounting bracket to the floor is 19.5”.
- Used on tables with a center vertical column.
- Sold individually
- Limited 90-day manufacturer warranty
Check out more information for this product here-->
MORryde Chair Buddy.
Linear Mode
