10 amp latching controller
Last year a motorhome iv been working on the latching controller fried due to water intrusion. Ordered the new one and just got around to trying to install it had water pump controlled for the time being with a switch hot wired in. Now trying to install the new one and iv somehow lost the pic of the unit before i took old one out..
have 4 wires
red - 12v
blue im assuming is switch controll
black - 12 v
white - ground
the red and blue are smaller gage wire maby while the white and black are larger gage..
now were do they go on the controller that has gnd, load, SW, 12v.
its in a 2008 or so damon