Community Forums

ajoowl · 03-21-2011, 01:13 PM

Sure hope someone has some information that will help me- Not sure if National installed all awnings the same but this is what I have. The awning is mounted with a mounting kit that has a metal piece over the top of the motor home that is divided in two pieces - that metal piece slides into a groove on a rubber seal that keeps water from coming back over and down the side of the motor home between the side wall and the awning. Upon going up to inspect the top of my motor home I noticed one of these rubber sections missing. I have tried dometic which has bought a & e to no avail and checked with the RV dealer where I bought the motor home and no one so far has a source for me to get that rubber seal piece that I need. I have pictures of what I need - the piece is 1-13/16" wide with a groove to fit over the metal. Does anyone understand what I need and know where I can get this piece?
Thanks for any help one may offer-

Sharon Planert
ajoowl@yahoo.com

RickO · 03-21-2011, 01:52 PM

Hi Sharon and

I'm sure some of our experts will chime in with ideas for you soon.

Best of Luck...

Rick

**JohnRR** · 03-21-2011, 02:00 PM

Can you post the pictures you have or you can forward them to my email or PM them and I'll get them put into your post for you.

ajoowl · 03-21-2011, 06:16 PM

Thanks John-
I tried posting my pictures but I get a message saying my pictures are too large and I don't know how to change them? If I could email them to you that would be great-
Sharon