Have a 2006 Fleetwood Bounder 33R - wanting to remove the old carpet and vinyl flooring - both are original.
Seeking input as we want to go with vinyl - not sure on planks, tiles versus roll.
If planks or tiles thinking will glue down - what thickness will work - Have two slides - in front and in bedroom.
Am sure many have thoughts or opinions on the way to go - looking forward to hearing back,
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
https://www.irv2.com/forums/f115/new...ks-564571.html
I had previously put down a floating snap lock type floor, it actually held up really well and still looked good but due to subfloor issue had to tear it out so I just redid everything.
I ended up using a Pergo Vinyl plank, it floats also. Turned out pretty good, a little pricey though. One thing I was surprised at was the cost of the trim pieces, which was about 20% of the total cost.
__________________
Jim J
2002 Monaco Windsor 38 PKD Cummins ISC 350 8.3L
2005 Jeep Grand Cherokee w/5.7 Hemi
Had carpeting and vinyl replaced by luxury vinyl planking by my dealer who subbed out the flooring to a flooring professional. I left the bedroom carpeted.
They removed the dinette and got everything down to the bare subfloor.
Flooring guy called the lvp manufacturer for installation recommendations which was to glue down this product in mh applications.
Lvp product is rated to -20 to not crack. It's waterproof.
We had carpet and vinyl sheet flooring. Pulled it all up and replaced it with Earthwerks LVP part number Rapture Plank SRP 710, luxury vinyl planks. The installers glued it all down and installed quarter-round molding on the edges. They had a new piece of carpet bound which they laid on the main slideout floor. Nice job, we are very pleased with it all.
Planking Dimensions:
7" x 36" x 1/8" (nom)
(mm) 180 x 920 x 3.0
Linear Mode
