2008 Fleetwood Discovery 40X

[mrrebel77]

having problems with power level . turn power on and it says wait for a while and then goes to low voltage . won,t do anything up or down. looking to reset or is there nothing I can do on road .

[hayward3411]

Brake set, engine running, turn on leveler.........I have had mine for over 10 years and the "low voltage" always shows on display, usually disapears is 15 second or so. Then I level.

[Belgique]

Same coach but 2007. Google Power Gear and you'll find several manuals and service bulletins that tell you how to do a reset. If you're not getting flashing lights a reset may not be necessary. These documents will help you troubleshoot. These jacks are very sensitive. I show reverence when I start to move them. Engine running for a few minutes before touching the pad. Don't turn engine off when jacks are on.

I hate to do the "Google it" response but the manuals define a detailed process...leave out a step and you may break something else. I keep the service bulletins in that compartment.

[mrrebel77]

yes I looked up manuels at campground just to see if a simple fix . tried everything they had and a few other things others told me . that is how I found out lift manually . got bus home and all it does motor running hit power and wait 10 seconds wait blinks and then straight to low voltage. left it like that for 15 minuets and still nothing .tried to get factory help yesterday , no luck will try again. thanks for all in-put