There is no shader valve to recharge, it does not mean it's impossible. If original think it's R22 not going to be easy to get your hands on it.
If it suddenly just stopped making cold air . I'm thinking the compressor has failed to start, creating a lock out condition. It's possibly the start capacitor , burned or poor connection some where in AC.
I would try to see if it if the compressor will try to start again . If the coil has not been cleaned in years it's a good place to start. The thick foam under the cover can be severely broken down and causing loss of air flow through the condenser.
__________________
95 Monaco Crown Royale
M11 400hp, 4060 trans.
Aquahot, Generac Guardian7.5k
|