I have a 2006 fleetwood expedition 38L motorhome and the levelers will not operate. The transmission light on the control pad does not come on. The literature for the levelers states the problem is a blown fuse on the chassis fuse box. I cannot find a fuse on the chassis fuse box. Any one out there ever had a similar problem?
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
I think you have a FREIGHTLINER chassis. Some of those have a small, 2 or 3, fuse block mounted in the last or 2nd bin on either side.
Having had Atwood jacks on our 2006 Expedition and paid about $3,500+ on repairs and parts, I replaced the whole system with HWH at about $7,000. Wish I had replaced when first power control board failed.
Good luck. I currently have an issue with my system. I had my control pad and module checked at m and m rv electronics. Both are operating as they should.
My jacks go up and down fine manually with my drill.
I am not sticking anymore money into my current system. Will be upgrading if i cant diagnose the problem.
__________________
2007 fleetwood revolution le 40l
Linear Mode
