We already have a sun screen that attaches to the MH awning. Thinking about getting end panels. This question refers to how to configure the top.
Our lower awning arms are horizontal to the ground...I could attach the ends here...but the top triangle between the sun screen and the MH awning would be open.
Or. I could attach the end to the coach slide awning anchor on the coach side and the roller on the outside. This method would cover the entire end including the open triangle.
Bugs aren't a factor.
Anybody have any experience with awning ends attached to the horizontal. Arms with the open triangle.
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
Camping World has panels that fit the ends slanted top with square bottom, does block sun. You can get all three sides. 2 ends and 1 long section to create an enclosure.
Linear Mode
