So, I'm new to MH'ing and the first problem is the backup camera. The system is a Voyager VOM-78. When connected to shore power I have picture and sound. When engine is started the monitor goes to a blank screen but I do have sound. Is there anyone who may have insight as to what might be wrong. Or what I'm doing with power setup that would cause the blank picture?
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
There should be a mode button on the monitor. Normally the screen is dark unless put in Reverse, when driving. With the mode button you can set for pic all the time
Thanks for all the help. I have been missing in action lately and just getting back to the MH. I fired her up last week and the backup camera/TV is working again. I really didnt do anything but start and engage transmission and put in park. So not sure if this Bounder has gremlins living in it.
Any thoughts?
Linear Mode
