Bedroom slide not working, 2002 Itasca Suncruiser 35u

[MacGyver612]

Of coarse going out of town in 2 days.
Dinette side works fine, went to put out bedroom slide, no sound from pump, in or out. Have had issue in past, did not work unless used dinette slide first then would work. would like to remove switch for rear slide. Looks like may have to remove cabinet in bathroom uhg. Did some wire wiggle and checked wires at pump and found 3 blade fuses 2 have power and 3rd looks like powers up from solenoid.
Thoughts. Does rear rocker switch have screws or fasteners from back side or pop out. Tried tool to go under it and did not wont to damage wall. Going to do some more digging now.

[MacGyver612]

So did some looking at front switch and it does pop out, used a different panel tool to remove. Bumped switch and it started working. Go figure

[EngineerRick]

If the switch connections are 1/4" blade or similar I'd try some contact lube on them. NO_OX_ID is the one I use https://www.sanchem.com/electrical-c...lubricant.html