Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×
RV Trip Planning Discussions

Go Back   iRV2 Forums > MOTORHOME FORUMS > Class A Motorhome Discussions
Click Here to Login
Join iRV2 Today

Mission Statement: Supporting thoughtful exchange of knowledge, values and experience among RV enthusiasts.
Reply
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on iRV2
 
Thread Tools Search this Thread Display Modes
 
Old 02-21-2018, 07:46 PM   #29
Senior Member
 
Join Date: Apr 2016
Posts: 446
A lot of wrong information being passed about throw away engines. The C-7 and the older 3126-E engine can be rebuilt. If you do not believe me just look it up in the internet and you will find sleeves that can be installed on the C-7 and the 3126 Cat engines. I have the 3126-E Cat engine on my coach and I have 70K miles on it now and it just broke in at 60K where it runs so smooth that I love the engine. It gets constant 8-9 mpg.
Not sure about the small Cummins engine if you can apply sleeves on it, but I do know that on the 350 hp Cat engines they can install sleeves when ever it needs an overhaul.
When I bought this coach brand new the warranty on the 3126-E was unlimited mileage or five years. Cummins does not give that much warranty and like somebody mentioned they have had their share of problems. The ISL 400 had a problem with wrist pins that were not machined proper and they never recalled the engines back. What they done was install a light on the dash so that it would warn you when it was going to blow up, so that you could have enough time to turn the engine off. And the smaller Cummins engine the ISB had a weak spot on the block and would blow a hole on some of those blocks that were manufactured south of the border. I had that engine on a Dodge truck and I blew two engines before I traded it in. Cummins did make the engines good, but it was disappointing to say the least.

Big engines are installed on big heavy coaches and if you have any mechanical know how, you will understand that the heavier the coach weigh's the more fuel it takes to move that weight.

Have a friend that owns a Wanderlodge Bluebird weigh's over 40K lbs and he told me he only gets five miles per gallon on a two cycle detroit diesel. V configuration, not sure what those engines are called, but it was a V-8 two cycle and I believe the coach was a 1993.
__________________
2002 Gulf Stream Scenic Cruiser 38'
Neway Freightliner chassis, 2018 Buick Envision Ess.
3126-E Caterpillar 330 hp
RayChez1 is offline   Reply With Quote
Join the #1 RV Forum Today - It's Totally Free!

iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!

You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!

Old 02-27-2018, 02:05 PM   #30
Junior Member
 
Join Date: Jan 2018
Posts: 2
Rstoney55

My brother is a mechanic, and he told me to get a CAT. I recently purchase an Itasca Bounder with the CAT 330 HP with 29K miles. I am hoping it will serve me well.
Rstoney55 is offline   Reply With Quote
Old 02-27-2018, 05:28 PM   #31
Member
 
Captain Dan's Avatar
 
Join Date: Dec 2017
Posts: 79
You guys saying to baby these things is hysterical. Have you ever seen how a semi is operated by a minimum wage flunky?
I’ve owned several heavy trucks and never had engine problems. Cat’s own literature says a C9 is expected to live 750,000 in a #60,000 dump truck.

A commercial truck is operated foot on the floor between shifts for its entire life and there is nothing you can do to hurt it except lug it or overheat it.

Dan
Captain Dan is offline   Reply With Quote
Old 02-27-2018, 06:09 PM   #32
Senior Member
 
jimmy braden's Avatar
 
Texas Boomers Club
Holiday Rambler Owners Club
Join Date: Jun 2002
Location: What? Like right now? ;-)
Posts: 1,302
Quote:
Originally Posted by Captain Dan View Post
You guys saying to baby these things is hysterical.

Called duty cycle. Most Rvs probably have 10-20percent the load an LongHaul or Emergency vehicle.


Quote:
Originally Posted by Rstoney55 View Post
My brother is a mechanic, and he told me to get a CAT.

Keep that bro on speed dial.
__________________
2003 Scepter 40PDBB - Roadmaster RR8S - Cummins ISC350 - purch aug16
jimmy braden is offline   Reply With Quote
Old 02-27-2018, 08:24 PM   #33
Senior Member
 
A Traveler's Avatar
 
Join Date: Aug 2017
Posts: 698
Quote:
Originally Posted by Bob Bulot View Post
...you cant out think an Allison trans. On hills, on-ramps, or when passing, leave it alone...

This is BAD advice. The flaw in this position is the Allison can only react to something that has already happened. It cannot anticipate anything.

You CAN anticipate that up coming grade and get the transmission in the right gear to get the engine RPM up on the horsepower peak before you hit the grade. That prevents it from lugging down on the hill in top gear.

These vehicles are NOT cars. You cannot just put them drive and drive down the road, blissfully thinking that the vehicle will do all your thinking for you.
A Traveler is offline   Reply With Quote
Old 02-28-2018, 08:20 AM   #34
Senior Member
 
G Schulz's Avatar
 
Join Date: Oct 2014
Location: Alberta
Posts: 598
Cat Power

Quote:
Originally Posted by A Traveler View Post
This is BAD advice. The flaw in this position is the Allison can only react to something that has already happened. It cannot anticipate anything.

You CAN anticipate that up coming grade and get the transmission in the right gear to get the engine RPM up on the horsepower peak before you hit the grade. That prevents it from lugging down on the hill in top gear.

These vehicles are NOT cars. You cannot just put them drive and drive down the road, blissfully thinking that the vehicle will do all your thinking for you.


I would have to agree with this. I always down shift before a grade to keep the RPM up. And as far as owning a Cat I have a C7 and all I’ve had to do is change the valve cover gasket due to a small leak.
G Schulz is offline   Reply With Quote
Reply

Tags
cat, power



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
CAT 3126B will not start need input on two CAT service centers (Gilroy CA) NathanJS Caterpillar Engine Forum 23 07-23-2016 10:31 AM
Cat condo 1 and Cat cond 2 with litter boxes! Rexhall97 RV'ing with Pets 28 03-22-2014 08:35 PM
Cat 3126 vs Cat C-7 HP and torque Deucenut Caterpillar Engine Forum 5 03-01-2013 10:08 AM
Cat® C7 Engine To Power Workhorse R Series Diesel Chassis DriVer RV Industry Press 1 12-14-2006 02:56 AM
Cat® C7 Engine To Power Workhorse R Series Diesel Chassis DriVer RV Industry Press 1 11-30-2006 02:33 AM

» Featured Campgrounds

Reviews provided by


All times are GMT -6. The time now is 11:46 AM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.