Hi does any one have a schmatic or wire ing conversion to go from a three wire CCi gas detector to a Saftey Alert gas/co dettor four wire?
Thanks in advance.
__________________
Cary McHugh & Stacey Fairchild
Valley Springs , CA
1999 Rexhall Aerbus 3250BSL
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
Is this the one with a gas shutoff valve? If so, Red is 12v+, Black is 12v- (ground), white and black/white stripe go to the solenoid gas valve (white is solenoid+ side). It is my understanding you must use the Safe-T-Alert solenoid in place of the CCI solenoid.
The Safe-T-Alert comes with instructions in the manual, If you don't have the manual for that model, you can find them at https://www.safehomeproducts.com/shp...ing/80/80.aspx
Find your model and then click the link for "product manual".
__________________
Gary Brinck
Former owner of 2004 American Tradition and several other RVs
Home is now West Palm Beach, FL