Chevy P30 Brake problems

[Keithmswalla]

I have a 1999 Chevy P30 chassis Georgie Boy 30ft.The right front brake caliper cooked the wheel bearing.
I replaced both wheel bearings, rotors, calipers,pads,& hoses and that wheel still gets hotter than the left side.
I had replaced rear calipers and master a couple years ago.
Has anyone else had this problem?
I'm looking for ideals .

[whem2fish]

Change the rubber brake line

[Mudfrog]

Originally Posted by whem2fish

Change the rubber brake line

The OP stated that hoses were replaced,, i'm taking it he means brake lines. If not, then yep, replace those.

I'd go back to the wheel bearings, check them and make sure the spindle nut is torqued correctly.

[onholdguy]

make sure the master cylinder operating rod is adjusted properly and the brakes are not dragging. Check the caliper slides are free and lubricated with the proper lube.Is the wheel bearing adjusted properly??? If too tight they will overheat.